View Single Post
  #7  
Old 04-30-2019, 07:04 AM
flyingfrizzle flyingfrizzle is offline
Senior Member
 
Join Date: Sep 2012
Location: Eastern NC
Posts: 1,653
Default

Quote:
Originally Posted by gofastsandman View Post
You can make up a few degrees with 4200.
Put a low bead down first and feather.


Very true, seen a stright swim platform on a slightly curved transom and the 4200 easily filled the gaps at the ends. They were about 1/4" at the worse part.


Also if you used washers for spacers on the thick part of the gap and none on the thin part you could tighten it down and the washers would keep the thick part of 4200 from smashing out. Once it set up you would be good to go....
__________________
Current SeaCraft projects:
68 27' SeaCraft Race boat
71 20' SeaCraft CC sf
73 23' SeaCraft CC sf
74 20' SeaCraft Sceptre
74 20' SeaCraft CC sf
Reply With Quote