The tank that I just built will be getting an zinc chromate coating after a quick sanding then I will be using some left over 2 part epoxy that was for "marine coatings and water vessels". It was over $300 for the two part A&B mixes and may not be coal tar epoxy but I have half of it left and think it will probably work near as well. Plus the tank is 3/16" thick instead of 1/8th so Im not too worried any how.
I would use it if you got it....
__________________
Current SeaCraft projects:
68 27' SeaCraft Race boat
71 20' SeaCraft CC sf
73 23' SeaCraft CC sf
74 20' SeaCraft Sceptre
74 20' SeaCraft CC sf
|