So I finally got the aft bulkhead templated and began filleting in.
https://ibb.co/wsk2qZv
I’ve removed the bulkhead under the cockpit severe rotting again... bottom third was just gone. Mush
https://ibb.co/9r9rymS
After the bulkhead came out, was able to remove foam easily. Forward bulkhead is rotted clear through too.
https://ibb.co/QYr2jNg
I’ll need to sort out drainage soon. Fore to aft. Planning to install bilge in forward area. Will Extend stringers as suggested, and lay down some fresh glass and gelcoat. And add some cross braces that will support tanks and tie the sides together.