Quote:
Originally Posted by KNZ911
SNAFU,
looks like most have gone with a 2 or 2.5" arch for the transom. I used a piece of 3/4" PVC pipe, clamped on each end and raided 2.5" in the center. This gave a nice even arch for the transom and followed the lined of the previous sides. I do have the mold for a transom cap that Kraken used. I'm in Jupiter / Deerfield Beach (work) if you need to use it. I haven't made my part yet, but soon I hope.
|
I also use a piece of PCV and spend a little xtra time making sure the PVC fit the angle of each gunnel for a good transition and consistent angle