Quote:
Originally Posted by KNZ911
SNAFU,
looks like most have gone with a 2 or 2.5" arch for the transom. I used a piece of 3/4" PVC pipe, clamped on each end and raided 2.5" in the center. This gave a nice even arch for the transom and followed the lined of the previous sides. I do have the mold for a transom cap that Kraken used. I'm in Jupiter / Deerfield Beach (work) if you need to use it. I haven't made my part yet, but soon I hope.
|
KNZ911 - Thanks for the reply. Exactly what I was looking for. Right now its right about 2.5". We used the cap to get the curve just like you described above. Before we started glassing, I just wanted to confirm. Really appreciate the offer on the mold.
FYI - Im in Boca and the boat is in Pompano.