The devil is in the details! The little things always take the most time, well besides fairing...
Yes i was in a hurry and only measured once before cutting on these as u can see, DOH!
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr
Quickie gutter material
Untitled by
dirtwheelsfl, on Flickr
Moved the miter saw outside for these cuts. The whole aft edge got core removed and solid glass put in for hinge hardware. The corners got filled with epoxy (red stuff) and rounded over before tabbing.
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr
This is a piece of hollow-back rubrail with packing tape under it mushed in some epoxy to form a round profile. It will keep that edge from getting beat up. The rest of bulkhead gets core taken out of the edges, epoxy filled then glassed too... Fasteners got a full inch depth filled.
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr