Quote:
Originally Posted by No grave but the Seacraft
Time to get dirty. I will not be using the console captain's chairs and liner. The floor and gas tank were shot so it all must go. I am hoping to relocate the fish box to fit lengthwise between the stringers in front of the new fuel tank so I removed the casting deck in one piece to save the hatch gutters. The gunwhale cap was cut from the liner as one piece and set aside to be reconstructed later.
|
You may want to support the hull sides with a few 2x4's fastened to each side if you haven't already. Some guys have had problems putting the the cap back on because the distance between the sides had widened.