[No grave but the Seacraft]

So my gas tank mounts are glassed in place. I will be using 5200 to glue 1/4" X 2" PVC strips to the the bottom of tank and the gluing that to the tank mounts. Once that is setup I will be fiber glassing coosa board bulkheads on the top and sides to keep it from bouncing and sliding around. I've cut the bulkheads, sides and bottom for my forward fishbox. I'm using coosa for the bulkheads and 3/4" honeycomb for the rest. It is currently 48" long but i might cut it down a bit. I had planned on using the original fishbox turned sideways between the stringers but I didn't like the way it looked. I will be using the hatch and gutter though. The swim platform is finally glassed in place. Just for fun I included some pics of my bike fishing setup I just finished for an upcoming camping trip. The rod holders work with and without sandspikes.