To be clear this is the plan for the non skid, please critique and offer insight if you have it!
1. Final 545 Primer on the Whole Deck
2. Sand 220,320, ultra fine scotch brite and water.
3. Denatured Alcohol Wipe.
4. Finish topcoat on the no non skid areas and the borders around the non skid
5. Let cure 24 hours ish
6. Tape off border for non skid, cover all no-nonskid parts.
7. Mix Topcoat and Griptex fine and coarse mix in spray cup. 2.0 nozzle.
8. Coat non-skid areas until covered.
8. Finish "sealer" coat with topcoat.
9. Pull tape and walk away.
What are we doing wrong?!?!
|