Figured I will give an update.
Nothing major lately just a lot of little things. I am working on filling in the existing thru-hulls now. Ground down the glass to a 12:1 taper and laying in the new. The raised stringers have been cut to length and tank pre-fit. The bulkheads for the tank have been cut out. The whole deck section for inside the cuddy has been cleaned up and I have the new core material; 1/2" Carbon-Core honeycomb. The last layers of glass have been added to the transom hole repairs. Grinding smooth will be next. I may do some fairing too.
I am looking forward to finishing fixing the thru-hulls and getting the cuddy deck back in place. That will be a good milestone. Then I can do the separating bulkheads and fuel tank. Progress.
|