[take a potter]

Got the form/mold made for the platform, minus the final clay radii on my curves. I decided to do it a little different and not create a hood to go over the clamping board, but rather glass the back of the platform to the face of the clamping board. The front lip of the platform will be let into the front of the tub and glassed over. Also, tried something different for the radii at least on the straight sections. I got a couple of pieces of pvc cove molding from Lowes and ripped the excess wall thickness off. Also beveled it, where necessary, to 12 degrees. Used hot glue to attach it. If it works out it sure was easier than running clay. Used a cut up plastic feed bucket for my curves.