So i made some head way the past weekend. I got the transom all glassed in.in total there is 4 layers of 1.5 oz mat and 3 layers of 22 oz Triaxal fiberglass. The green around the core is core bond i used it to help the radius not so tight. I used the white tape to help keep the core clean and easy clean up. Also made the scupper block out of divinycell foam for the rear. Will install them later i still don’t know if i want the scuppers to exit the floor or the rear. I did foam in the stringers but i ordered and the wrong weight. I did 2 lbs and it should of been 4 lb foam. So this weekend i will be digging it out and cleaning the edges up around the transom
|