Quote:
Originally Posted by ste6168
Can you post a picture of your setup? These are 12"x12" tabs, as well. I am not sure I am following your description without a picture.
|
These pics show my 12 x 12 trim tabs as I arranged them to avoid major changes to my swim platform and ladder. Like a lot of things there have been mods through the years since Bushwacker and I made our platforms together about 1977. I later added the ladder, but wanted it underneath so one could sit comfortably on the platform. The other pic shows No Bones 18 x 9 tab. I mounted mine at 5 from the chine (instead of the recommended 3 4 Bennett recommends) so the actuator would avoid my device which supports the ladder. I went with the 12 x 12 as one recommended by Bennett. As I shut the engine down frequently for watersports, but dont want the tabs to retract every time, I wired the tabs to a separate switch instead of to the ignition. So far I have found the tabs and mounting effective for my needs.
Best wishes, hope this helps.
