Quote:
Originally Posted by DonV
Terry, even though I did an Arjay pour I would not think twice about raising it with another pour. I would drill 1/2" holes every four inches or so down in the transom, both vertical and horizontal, and epoxy some 1/2" fiberglass rebar for the new pour...... Good luck!!
|
Thanks Don
The "rebar" is a good suggestion- although probably never will raise it. But never say never, right? The rebar reminds me, the original teak door on my Seafari cracked quickly at the dovetail joint between the vertical and horizontal sections. When the same thing started to happen to the SeaCraft replacement door, I drilled, doweled and glued the joint. The crack is still there but never grew wider. Regards to Deb.