Re: Transom Concerns?
I would suggest you get it checked with a moisture meter. If the transom is wet, you might want to investigate further. There is a fair amount of flex in most of the ones I have looked at, especially with the big 200+ motors. You get 470 pounds bouncing back and forth, and it will show some flex.
My transom on my Sceptre has small spider stress cracks in the corners, and on the edges of the cutout. I believe they have been there for years, and have not grown any since I have had the boat (18 months). I attribute them to having a heavy/stout 250hp engine hung on the back, and trailering alot.
If you have any real concerns, get a marine surveryor to access the health/condition of the transom.
|