Re: Great job Jason
Hi Tom
Thanks for the response on the leaning post....I'm trying to find a nice one and that looks like it...My problem is I, as well as anyone else who has the 23 with the big motor well, have limited space between the console and the well. I've been eying up a Birdsall with a fixed back, however it needs alot of room. From the front cushion to the rodholder in the handrail it's about 29" (overall width). I've been told to mount the leaning post about 12" from the bottom of the wheel to the front of this cushion. That leaves me only about 17" behind the leaning post to the motor well.....so I hope yours comes in smaller....
I'm very interested in the dimensions and if you have any more pictures of the leaning post itself or if you have any contact info on Will Garrett (web site, phone numbers) I would appreciate it ……and if it costs less that sounds like a good deal to me...
I guess I could always put on the bracket and gain a cockpit...
Thanks again
Scott
[ March 22, 2002, 10:38 PM: Message edited by: Scott ]
|