Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-16-2015, 02:43 PM
GameOnSalmon GameOnSalmon is offline
Recovered
 
Join Date: May 2014
Posts: 137
Default Merc 200hp on a 1974 Tsunami 20' - Propping Performace

Ok Guys,
Many people were asking me for Updates. Here you go... and I will continue posting my Testing. Originally had the Engine in the bottom Hole on Transom, I could Not get it High Enough.

Installed 4" Setback Jack Plate Still have 2" of adjustment on the Jack. Right Now at 1/2 Trim I can Get the AV Plate above the Green Water. (Should I raise The Jack some More so the AV is out With the Engine Tucked All the way in?)

Today I tested 19p Mirage Plus and 21P High Five.

Full Load of Fuel 50 Gallons with battery's at the Front. Keep in Mind I am Running at 3500 Feet Elevation.

GPS - 19p Mirage
3400 RPMS - 30.2 MPH
WOT - 5000 RPMS - 46.7 MPH

GPS - 21P High Five
3400 RPMS - 27 MPH
WOT - 4800 RPMS - 43.6 MPH

I am thinking that a 17p Mirage Plus will still be Too Much. I am considering the 4 Blade PowerTech in a 16p.

I am looking to get the RPMS to 5800 at My Eleveation with this Load and it should be perfect.... Anyone have some Ideas on.....

Where to set the AV Plate in Relation to TRIM and PROP Ideas?

Thank You
Robert
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft