Pictures of the new boat EMANON

[trave2]

Picked the Boat up last week! We have been waiting years for this. I know someone posted a thread asking about it a week back or so but we were finaly able to pounce on one.
1986 23 cc
2004 Yamaha 250 4-stroke
new 150 1/4 in. Tank epoxy coated
new foam core center decks
re-wire with switches and fuses in cc
fresh-water--raw water washdown
t-top w/ dual stations
furuno chart plotter
live well
what else....

Here are 3 pictures with many more to come!!!!

[DonV]

Congrats!!!! Very, Very sweet!! I've been there and I know it's as good a feeling as the boat looks!! Good Luck 'cause you are now hooked all the way to the barb!!

[bobr338]

Very nice 23! I actually came close to buying this boat when I was down in Palm Beach last month. I just couldn't figure out trailering it back up north quick enough to make it happen. He did a hell of a job with that thing!

[Trayder]

Congrats That boat was the best deal I have seen in a long time You probably picked it up for lass than the cost of that motor, the 2nd station and Furuno electronics are a bonus!

nice work!!

[oldfielder]

nice rig-good luck

[Blue197320]

hi , i just picked up an 87 like yours. by any chance could you post some more pictures of your console? id like to see what that little hatch is on the port side of it as well. inside the console would be great. are there any pictures of the rebuild anywhere??? mine needs a floor for sure. im trying to get an idea on the best way to do it. thanks alot!

[trave2]

Port and Starboard sides of the cc have the hatches, Not to big about 2x1.5 ft you can squize in there enough to reach back side of electronics. That white box is the fresh water tank.

Is the front cooler custom or standard on this model? I have seen many with a big door instead.

[gofastsandman]

hi , i just picked up an 87 like yours. by any chance could you post some more pictures of your console? id like to see what that little hatch is on the port side of it as well. inside the console would be great. are there any pictures of the rebuild anywhere??? mine needs a floor for sure. im trying to get an idea on the best way to do it. thanks alot!

Evan ,
My stealth Slacker has an alluminiun tackle tray insert in the teak hatch portside. Small , so I removed the insert for access.
GFS

[Blue197320]

thanks for the extra pics. i have a little teak door on each side that ill probably be replacing with something bigger like yours. id like to have those open up into a dry storage space. ill need to start designing that. does your boat still have the liner in it or was it removed when the floor was done??
GFS, you had a little tackle station in there? that might be a good idea for one side of the console. do you have pics of that tray?

[Basspond]

I have the same teak doors on each side of my console on my '79 20. One side is a tackle locker, the other is open for console access.