Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-06-2002, 09:21 PM
Mark Mark is offline
Senior Member
 
Join Date: May 2002
Location: 80304
Posts: 1,252
Default 140 Suzuki 4-stroke on SeaCraft 20?

Hello all, I'm curious if anyone out there has any experience with a Suzuki 140 4-stroke on a SeaCraft 20? I'll be repowering in the near future and am intrigued by this option. Any thoughts would be appreciated. Email me directly if you like: mark@markpix.com
Reply With Quote
  #2  
Old 06-06-2002, 10:32 PM
PressureDrop PressureDrop is offline
Senior Member
 
Join Date: Apr 2002
Location: West palm beach, FL
Posts: 283
Default Re: 140 Suzuki 4-stroke on SeaCraft 20?

somewhere in the general forum i believe, trayder posted about this engine. he said he had used it on a boat of similar weight and was absolutely thrilled, and if i recall correctly, he said he was gonna power his 20 with one of them, try talking to him about it!

Ben
__________________
no falls, no balls
Reply With Quote
  #3  
Old 06-06-2002, 11:31 PM
Trayder Trayder is offline
Velvet Jones
 
Join Date: Feb 2002
Location: Newport RI / Key West FL
Posts: 1,642
Default Re: 140 Suzuki 4-stroke on SeaCraft 20?

I ordered one I do not have the boat ready yet but there will be a Suzi 140 4stroke on the stern when i am done, I figured buying the engine would boost my motivations to finish the project [img]images/icons/grin.gif[/img]

I am also putting on the SeaMark bracket.

There is another member who powered there 18 with a 140, check the boards and it should show up.
Reply With Quote
  #4  
Old 06-07-2002, 07:32 AM
bmaj319 bmaj319 is offline
Member
 
Join Date: Apr 2002
Location: St. Croix, USVI
Posts: 37
Default Re: 140 Suzuki 4-stroke on SeaCraft 20?

I have the 18 footer with the DF 140...so far I'm real happy with it. It's got about 30 hours on it now, and it purrs like a kitten. I been trying different props, looking for the best blend of hole shot/top speed/WOT in the approved power band. Last evening clocked 43.8 mph by GPS with a S/S 14x20, and it jumped up pretty good too.

Fuel economy seems really great, although I haven't yet measured it carefully. Waiting for a chance to run some distance outside at cruise...I'll post the results when I do.

I've yet to talk to a Suzuki OWNER who has a beef with the four stroke 115 or 140. They are new of course, and there's no wealth of experience to draw on, so I understand some of the sceptical attitudes of some, especially in light of reported problems with FICHT's, Opti's and HPDI's.

So I guess time will tell if it's a great engine, but it's been everything I've wanted to date. The 20' SeaCraft is only a few hundred pounds heavier than my 18 according to the specs, so I'd expect roughly similar results.

Good Luck!
Reply With Quote
  #5  
Old 06-07-2002, 03:05 PM
BacDoc BacDoc is offline
Junior Member
 
Join Date: May 2002
Location: Vero Beach Fl USA
Posts: 29
Default Re: 140 Suzuki 4-stroke on SeaCraft 20?

I'm running a Honda 130 on my 20'. Performance is exceptional - gets out of the hole quickly and does about 40mph WOT on the GPS. Once you go 4-stroke you'll never go back, lack of noise and smell as well as smooth trolling and idling adds a new dimension to the fishing experience. Running at cruise (25-30), I notice the best fuel economy and my 45 gal tank seems to last about 40% longer than my previous Merc 150 2-stroke on the same boat.

The only drawback of the 4-stroke is the weight and with 2 anglers in the stern and a full baitwell you get wet feet.

I have not heard any thing negative about any of the newer 4-strokes only raves about quiet efficient performance. The 140 Suzuki would be an excellent choice for your 20', good luck !
Reply With Quote
  #6  
Old 06-07-2002, 06:31 PM
PressureDrop PressureDrop is offline
Senior Member
 
Join Date: Apr 2002
Location: West palm beach, FL
Posts: 283
Default Re: 140 Suzuki 4-stroke on SeaCraft 20?

doc - ive been considering a honda 130 for mine but have been discouraged by the weight, espically since i have an aluminum bracket, does it makethe boat at all stern heavy?!
__________________
no falls, no balls
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:39 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft