Joining the Seacraft community once again. Picked up a 1973 20 SF last week. Boat sat for a year. The floor was redone at one point but the finish work left a lot to be desired and they ended up putting carpet down to hide it. The tabbing into the liner up on the front step was done very poorly with only CSM and I was able to rip up the entire skin from the wet plywood. They even closed off the front compartment completely.
Somehow I found the original hatch for the front compartment in the boat, but I would like to get the dimensions of where everything goes because I'll be making a new floor up there. I need the size of the fishbox hatch and where it goes in relation to the front hatch.
Boat is mostly original besides the poorly finished floor. It has a 20" Transom with a big metal plate that is braced inside as well. Very solid but obviously not ideal. I have a 150 optimax for it that I will throw on.
The boat will eventually get restored, but for now it is a fun father son project that we want to enjoy. I just finished a full restoration on a Lake and Bay, so I'm no stranger to projects. Just want to use the boat first, then see what I want to change.
So if anyone has those dimensions, that would be extremely helpful.
11-05-2019, 06:08 PM
20 Seacraft Dimensions Needed
Hybrid Mode
