Another Outrigger Question

Miles Offshore · #1 11-11-2003, 07:35 PM

I guess its just a poll but, I am going to replace my el-cheapo whatever they are brand on my boat real soon. I see John and Ed and a few others are all going with rupps,tacos, etc. My question concerning them is how well do the t-top mounted riggers actually work?? I like to pull double lines plus a teaser on each rigger. Will these do that easily??? I obviously dont know how the rigging arrangement up top goes either, would /could someone explain that to me and also how much stress it puts on your t-top. I have been considering them but I think Im going to go back to my gunnel mounted 18 ft Lee's. I had those on my previous boatr and really liked them. I kinda like the "classic" lines of the older style gunnel mounted riggers since I really dont see a whole lot of them around anymore. What do ye honerable and knowledgeable members of the board think???

Craig

PipeDreamsMarine · #2 11-13-2003, 01:43 AM

Miles... I sell and install Lee's, I have a set on my boat. I like the way the Lee's work, two positions in or out and they lock and won't slip like the Rupps do. I've replaced a few E-tec's that squeeked as the boat rocked and rolled and drove the owners half mad. As far as stress on your top goes it's not as bad as you may think. With the riggers laid back in a running position they don't whip very much. I like the riggers that give you the option of welding a support to the bottom of the base to help brace it in. I've used them as part of the leg on some tops and they worked great. When you rig them on a T-top you have 2 positions. Oneplace is where you clip the line when they are out in the fishing position and the other is when they are in the running position. I have Lee Swinders on my boat with the lay-down holders, you can see them in the pic.

[ November 12, 2003, 12:44 PM: Message edited by: PipeDreamsMarine ]

Miles Offshore · #3 11-12-2003, 06:49 PM

hey Don, thanx for the reply!! In the picture it looks like they are attched to the pipeframe vrs the top??? I like Lee's stuff as well, I have so much stuff on my top though I am leaning more and more to the gunnel mount 18.5's.

NAHIM · #4 11-12-2003, 06:56 PM

craig,

How about the the TACO striker base. they are 90 degrees for t-top applications when in cruising mode they sit back like the expensive ones. and they do not fall when in trolling mode plus they are economical.It all depends how much you plan to spend.

Scott · #5 11-13-2003, 12:00 AM

Craig
What about the ability to fish around them ?? Up on top they are out of the way. I like Lee's also .... but thats the one I've fished around most .... I was also thinking of the E-tec Sailfish but Don has me thinking now ....

Someday Don we will talk about some retro fits in my T-top.

kricharda · #6 11-13-2003, 07:59 PM

Interesting topic. Has anyone seen or tried the new T-Top mounted riggers that crank out (gear controlled) from below? Not sure, but seem to recall they were made by Rupp?