Show us yer BOATS!

[John R]

OK - in response to a "Boat Pics" thread, here is what I had e-mailed to me by BMAJ - 1 sweet 18:

Re: Steve's post about SeaCraft pix, Here's one of my '75 eighteen. I just
finished 20 hours on the new Suzi 140 four stroke...I'm setting it up for
snorkling/diving/fooling around, rather than serious hook and line action.
The shot is taken at "Peanut Island," just inside Lake Worth inlet, next to
Palm Beach, Florida.

<font size="2" face="Verdana, Helvetica, sans-serif">

[JohnB]

Here is my '89 SeaCraft Scepter. Still looking for a name for it though.


[ May 27, 2002, 05:10 PM: Message edited by: JohnB ]

[capesams]

JOHN B

How about beauty and the beast? You being the beast of course. hehehe! just funnin. [img]images/icons/grin.gif[/img]

[markdpm]

Im trying!!! It seems to be easier restoring an old boat or reducing a fracture then getting my Photos on the web....If it does get thru it shows the boat right after Hurricane Andrew, being transfered to a new trailer in the backyard and the final product. By the way, what is the best way to remove that rust on the stern lift rings. Mark [IMG]http://photo 1.jpg

[ May 27, 2002, 08:32 PM: Message edited by: markdpm ]

[John R]

Mark, you need an image that's already on the web and then put in the full path - {IMG}http://thesitethephotoison.DOT/path/to/the/photo/nameofphoto.jpg{/IMG}

Replace the "{&}" with [ & ]

If the image is not already on the web, e-mail them to me and I can put them up for use on this site.... john@striped-bass.com

Now - I'm not an administrator of this site at all but I don't think Trayder will mind if I put up a few pics. He'll then be able to put them in the Owner's Pics section of the main site when he gets a chance (he's out fishin' a lot [img]images/icons/wink.gif[/img] )

[capesams]

GEZZZZZZZZZZ JOHN I hope I didn't start something here , I didn't mean ta make more work for you. Send TRAYDER a bill [img]images/icons/grin.gif[/img] this is what he get's for being out fishin when we have to stay home an work.. how was the game?

steve

[micheal s]

hi john, i'm trying to redo an 1975 18 cc sf also, does your 18 have an access hatch where the sending unit is, mine did not have one, and do you know what size rubrail is on your 18, any info would be great, thanks mike

[Bmoney1209]

you mean an access hatch in your splashwell?

[micheal s]

no, what i mean is an acess cover on the gas tank cover, so if you ever have to change your sending unit or if it leaks you can get to it with out taking the whole console up,

[Bmoney1209]

I have one under my console that I installed. It's a round pie hole cover, not very big, around 8 inches diam. . Also have one in my splashwell. [img]/images/graemlins/grin.gif[/img]