T-Top For Sale(Electonics Box, Curtains, more)

[CaptScottNC]

This T-top would fit a Sea Craft 23 Console with a little room to spare. I'll get exact measurements and add them soon. To touch on the highlights they are as follows:
Aluminum T-Top Manufactured by Marine Specialties Custom Fabricators in Florida. Reinforced to support a secodn station on top and outriggers with plates and cutouts in place. Holes predrilled and canvas is in perfect shape. No unravelling. Edges were treated properly to insure this. Radar arch also with 3 stainless steel antenna mounts, horns and holes for a radar mount. T-top could easily be used without this arch and I will sell separately if desired.
6 Gold Rocket Launchers welded and solid. (2 offset)
Electronics box wired, 2 interior lights and console lights mounted underneath the box for lighting up the console. Locking box with spring loaded hinges to keep clear front in upright position.
Custom fitted zipper pouch can be seen that could holds PFDs, etc and works much like a custom fitted T-bag. Nice feature!
Curtains do show a little wear but could easily have the clear vinyl replaced with Strataglass for little more than the price of the material since fabrication of the curtains is already taken care of.

Can't think of anymore to say. This top with it's features would easily run in the neighborhood of $4000 or more. The guy I bought it from said it cost $6000 when it was built by Marine Specialties. Sounded a little high to me but it was definitely a high quality unit. Email me with questions at CaptScott@shacklefordcharters.com I will meet if it's not TOO far away but would prefer someone to pick it up. Moving from one truck to another can be tough. I transported this from Florida in my truck and it is solid as a rock. I'm asking $1950 obo. Below are the pictures.

CaptScott@shacklefordcharteres.com

Almost forgot.. this has 4 rod holders in the T-top as well for horizontal storage and 2 rear and 1 front spreader light. This thing is rigged out! You can put 10 rods just stored in the T-top!















CaptScott@shacklefordcharteres.com

[CaptScottNC]

Got the measurements.

Shaded Area of top measures 72" by 96" providing awesome shade for the summer. Internal measurements are 40-41" wide where it would bolt to console and internal width of legs at the bottom base is 43.5". The top could be installed on something a little wider or narrower by removing a couple of the braces that mesaure 40-41" wide and adding some standoffs (That run about $20/each and would need 4 or having a local shop just weld on a couple small elbows. Should run about $100 total.) Feel free to come by and see this top if you like. I will take some photos with the curtains on as well and can email them if you like.

Thanks for looking!

[CaptScottNC]

Photos are not the best butyou get the idea. Some scratches on these curtains but otherwise in great shape. First time I've put them on since I bought the T-top. Everytime I look at it I keep thinking I better keep it and might sell the Top coming on the boat I'm buying. So I might have another T-Top listed before long. The curtains have old water spots that I'm going to try to get off but it's a real pain. Anyone with good ideas to get old water spots off would be much appreciated. Also, was going to buy some scratch remover to get rid of minor scratches that came from it being stored poorly or during it's last transportation. Most are very light and will come off pretty easy. Thanks for looking! Call with any questions.