|
#1
|
|||
|
|||
27' SeaCraft 1968 Fly Bridge
For Sale; Seacraft 27. 1968 flybridge convertible. Redone in 1998 (finished), professionally converted from twin to single Mercruiser 454, 300Hp, Bravo 1 outdrive new in 1996, 215hours with fresh water flush. Has power steering, tilt, trim tabs, stainless steel prop, 15" X 15". New poly 40gallon selectible fuell tanks. Vessel has galley with appliances, head with overboard flush, dinette (4 place), veeberth with 'V' filler. Flybridge with helm & observer seats, bimini top, spray shield. Electronics are antiquated VHF, botom machine, GPS. Deck has danforth 16 anchor with rode, fenders and lines. Cockpit has saltwater washdown, fishing chair, live bait or fish well. Last time in water, one month ago, then set on her roller trailer.
Belonged to doctor fishing friend that had a heart attack and can no longer care for her. To my knowledge, the only thing that doesn't work now is the washdown pump. Not leaking but could probably use a new accordian gasket before heavy use. Price is $12,500 OBO. 361/855-3807, Corpus Christi, Texas. Always here after 1800hours, unless we're fishing. Any questions, just call. |
#2
|
|||
|
|||
Re: 27' SeaCraft 1968 Fly Bridge
About how much does she weigh with the trailer?
__________________
Boatless again! |
#3
|
|||
|
|||
Re: 27' SeaCraft 1968 Fly Bridge
Here are some spec's out of my 1978 SeaCraft catalog
Master Angler 27 feet Beam 9'10" Height, keel to top of hardtop 10'4" Draft (including prop) 28" Weight - approx 7,000 pounds Degree deadrise - hull at transom 18" Fuel capacity - 165 gallons If anyone wants more info i will be happy to fax them the stnard equipment sheet
__________________
http://i113.photobucket.com/albums/n...iseacraft3.jpg |
#4
|
|||
|
|||
Re: 27' SeaCraft 1968 Fly Bridge
I've got specs from 1967 catelog:
Overall Lengh 26'9" Designed waterline 22'8" Beam 9'10" Bridge clearance 9' Draft 18" with units up Displacement 7500 lbs Power twin outdrives up to 225 hp each Original cost with twin 160's $18,500 The price of boats have really changed over the years!
__________________
SeaCraft:1966 19' Bowrider & 1962 21' Raceboat |
#5
|
|||
|
|||
Re: 27' SeaCraft 1968 Fly Bridge
CarlaMF,
You should scan that 1967 catalogue into a pdf document and send it to admin@classicseacraft.com. It's would be a good addition to the specs page.
__________________
Cape Marine Supply |
#6
|
|||
|
|||
Re: 27' SeaCraft 1968 Fly Bridge
Did anybody buy this yet?
__________________
Otto And yes, I still believe in the four boat theory... |
#7
|
|||
|
|||
Re: 27' SeaCraft 1968 Fly Bridge
Rich,
I have a box full of old Sea Craft brochures, tests, articles, photos, etc. All dates back to the 60's. What I can do, is make a list & see what ClassicSeaCraft wants.
__________________
SeaCraft:1966 19' Bowrider & 1962 21' Raceboat |
#8
|
|||
|
|||
Re: 27' SeaCraft 1968 Fly Bridge
The BUC book sez she weighs 7200-7500, depending on configuration. Haven't a clue what the trailer weighs, but it's heavy. Had a 28' Winner hull sitting on it when I bought it. If you'd like to ship it commercially, I'll take $10,500 for the boat and keep the trailer. Bodine
|
#9
|
|||
|
|||
Re: 27' SeaCraft 1968 Fly Bridge
I would like to see more pictures of the transom area and the outdrive if you have any more pictures.
Thanks |
#10
|
|||
|
|||
Re: 27' SeaCraft 1968 Fly Bridge
Wonder why someone would convert it from outboards? Seems like you'd want the floor space. Nice boat though.
__________________
3 Boats / 1 Floats Re-fit or Reef-it |
|
|