|
#1
|
|||
|
|||
Emblem-CNC Drawing!
Here’s the CNC drawing of the SeaCraft Emblem....
It’s 1/8” thick, Mirrored Stainless Steel #304, laser cut. Size is approx. 9-1/2” w x 2-1/4” high. Has 5 screw holes for mounting. Cost is $55 per emblem plus shipping & insurance. 1 Emblem = 55 + 5.50 = $60.50 2 Emblems (1 pair) = 110 + 6.50 = $116.50 3 Emblems = 165 + 7.50 = $172.50 4 Emblems = 220 + 13.00 = $233.00 5 Emblems = 275 + 14.00 = $289.00 With your check, please include your mailing name, and address (if different from what’s on your check). Also, include your member name so I can cross reference it with my list of orders.
__________________
SeaCraft:1966 19' Bowrider & 1962 21' Raceboat |
#2
|
|||
|
|||
Re: Emblem-CNC Drawing!
Here's the list of orders to-date. If there are any changes, or you wish to add an order, please respond.
I have a call into the SS fabrication shop to get a scheduling on when they will be run the production and I'll post as soon as I find out, but probably not until late next week sometime. THE DAY HE RUNS IT, IS WHEN I WILL GIVE HIM THE FINAL COUNT OF EMBLEMS. 1 EMBLEM: elpez 2 EMBLEMS (1 pair): Rich / Capt.Chuck / Strick / hermco / BryanA / Rodman / Yamtt125 Kerneltugboat / Scott / Briguy / Tarpun / Pfflyer / PeterB / Canes TheDink / abl1111 / Wavelength / MilesOffshore / Bonefish Oldbluesplayer / Oldfielder / gigolot 3 EMBLEMS: dljohn 4 EMBLEMS (2 pairs): 1bayouboy / FourBoatTheory / 65Bowrider / Rockdoc / JW-Tex / LouJr toddslures 5 EMBLEMS: NoBones Thanks to all of you, we have been able to make this happen!
__________________
SeaCraft:1966 19' Bowrider & 1962 21' Raceboat |
#3
|
|||
|
|||
Re: Emblem-CNC Drawing!
How did Hermco get a lowercase H? It looks like they will be great. Nice work! I am trying to get Bill Potter to order a pair!
|
#4
|
|||
|
|||
Re: Emblem-CNC Drawing!
Quote:
See ya, Ken
__________________
See ya, Ken © |
#5
|
|||
|
|||
Re: Emblem-CNC Drawing!
Carla,
Very, very impressive. Greatly appreciate it. I will get the check out to you this week. Peter
__________________
http://i113.photobucket.com/albums/n...iseacraft3.jpg |
#6
|
|||
|
|||
Re: Emblem-CNC Drawing!
Carla - I'd like to sign up for 2 . . . if it's not too late.
|
#7
|
|||
|
|||
Re: Emblem-CNC Drawing!
can i still get one of these ?
|
#8
|
|||
|
|||
Re: Emblem-CNC Drawing!
Thanks Carla
I think I'll take another pair for the next project so thats 4 total for me. I'll send a money order next week. strick
__________________
"I always wanted to piss in the Rhine" (General George Patton upon entering Germany) |
#9
|
|||
|
|||
Re: Emblem-CNC Drawing!
Please put me in for 4 emblems. I will put the check in the mail today for $233.00.Thanks Keith Leverette
|
#10
|
|||
|
|||
Re: Emblem-CNC Drawing!
Hi Big "H"!!!!!...sorry Don, that was just a typo.
I've made note of these additions. Thank you. Strick, sure you don't need a dozen for your future projects? I'm enjoying all the pictures and admire the work you're doing. Very nice job! Don't forget, a dollar is going to this site for every emblem purchased...so far, over $80 ... not bad!
__________________
SeaCraft:1966 19' Bowrider & 1962 21' Raceboat |
|
|