20' CC 1970 - 175 HP Yamaha

[psullivan4144]

Well, I have fought this long and hard, but now I have to put my baby up for sale. It is a 1970 CC SeaCraft that was overhauled 2004. The boat is located in Raleigh NC. I tried to be as specific as I can, but if there is additional information needed, please let me know. I am selling the boat and trailer for $10,000, I have over $18,000 invested (yes, I know, not one of my better investments, but the passion was true!).

Hull
Hull ID No. FLZA77350970 – purchased in 2002
Rebuilt in ’04 by Wet Edge Marine - complete overhaul including, cleaned and painted tank, raised console; closed in transom; paint inside and out
Hydraulic Steering installed
Electronics include oil pressure, water pressure, rpm, tilt, 6 fuses, and compass
50 gallon Tank
2 rear bait wells – not in use

Trailer Engine and Jack Plate
175 hp 1996 Yamaha purchased rebuilt from Outboard Motor Connection in ‘04
2 cycle oil pump
About 6-7 gallons per hour
Less than 50 running hours (estimated),
ALL FRESH WATER USE – NOT USED IN SALT WATER SINCE REBUILD
Top end speed about 53 mph with full tank and single occupant
12” vertical displacement Jack Plate purchased from Bob’s Machine Shop

Trailer
2002 Continental Aluminum Trailer
24’ length – 3500lbs GVW

Appraised at $13,400 (’05)

I can send electronic copies of the following information upon serious request:
• Insurance Appraisal completed by Macek Marine Services Inc.
• Title Documentation
• Yamaha engine purchase documentation
• Detail work documentation from Wet Edge Marine

Yes, I made my donation; what a neat web site - THANKS!
Pete


http://i264.photobucket.com/albums/i...g?t=1198728712
http://i264.photobucket.com/albums/i...g?t=1198728913
http://i264.photobucket.com/albums/i...g?t=1198728971
http://s264.photobucket.com/albums/i...h_100_1226.jpg
http://s264.photobucket.com/albums/i...h_100_1231.jpg
http://s264.photobucket.com/albums/i...t=100_1228.jpg
http://s264.photobucket.com/albums/i...h_100_1246.jpg
http://s264.photobucket.com/albums/i...h_100_1244.jpg
http://s264.photobucket.com/albums/i...h_100_1212.jpg
http://s264.photobucket.com/albums/i...h_100_1216.jpg

[abjohn]

Do you have an e-mail or phone # I can contact you with. Unfortunately, my system blocks photobuckets so I can't view the pics. my number is 941-527-0079 or e-mail at andrew.johnson@americhaseservices.com. Thank you

[doug7488]

Nice lookin' boat !
Good luck with the sale!

[Billybob]

Nice boat Pete.
If it were springtime, I'd drive down and take a look at that one, but I'm not ready yet.
Lets see if I can do this for Andrew:





Good Luck - I mean hold on to it for a few months.

[abjohn]

Thank ya, sir but I get nothing but red-xs
Anyway, I'm sure I'll hear back from Pete soon and we can arrange for some images. I appreciate you trying.

[psullivan4144]

I am trying hard to get the pictures posted so that you do not have to go through Photobucket...but I find myself stumped. Lets try it again.

Regards,
Pete

[image]http://i264.photobucket.com/albums/ii184/psullivan4144/100_1209.jpg?t=1198804505[/image]
[image]http://i264.photobucket.com/albums/ii184/psullivan4144/100_1206.jpg?t=1198804628[/image]

[image]http://i264.photobucket.com/albums/ii184/psullivan4144/100_1226.jpg?t=1198804704[/image]
[image]http://i264.photobucket.com/albums/ii184/psullivan4144/100_1228.jpg?t=1198804782[/image]
[image]http://i264.photobucket.com/albums/ii184/psullivan4144/100_1231.jpg?t=1198804841[/image]

[image]http://i264.photobucket.com/albums/ii184/psullivan4144/100_1246.jpg?t=1198804921[/image]

[image]http://i264.photobucket.com/albums/ii184/psullivan4144/100_1216.jpg?t=1198804987[/image]
[image]http://i264.photobucket.com/albums/ii184/psullivan4144/100_1244.jpg?t=1198805062[/image]
[image]http://i264.photobucket.com/albums/ii184/psullivan4144/100_1212.jpg?t=1198805113[/image]

[psullivan4144]

Last time, all larger pictures!

Regards,
Pete

http://i264.photobucket.com/albums/i...g?t=1198806654

http://i264.photobucket.com/albums/i...g?t=1198806163
http://i264.photobucket.com/albums/i...g?t=1198806218
http://i264.photobucket.com/albums/i...g?t=1198806265

http://i264.photobucket.com/albums/i...g?t=1198806399

http://i264.photobucket.com/albums/i...g?t=1198806440

http://i264.photobucket.com/albums/i...g?t=1198806480

http://i264.photobucket.com/albums/i...g?t=1198806542

[ocean]

Nice looks 20 !

The bracket you have is trick, actually made by Jeff Porta (Porta Industries, Edgewater, FL.). The two aluminum plates, that hold alignment of base mounts, are for shipping and installation and can be removed after install....cleaning up the look of the bracket. This can be verified by going to Portaproducts.com and view their installs.
That's a $2500 rig, installed.

Good luck on sale.

[psullivan4144]

Sold - thanks for the feedback and great web site!!