|
#1
|
|||
|
|||
1979 Fully Restored 23' Seacraft
Jason- I sent you the $25.00
Well it's time to sell my 1979 23' Seacraft. The boat was fully restored in 2006 including new transom and awlgrip paint. The exterior of the hull is the original gel-coat. The boat has a 225 Yamaha 2-stroke with less than 100 hours. I have a full list and pictures of what was done. Too much to post here. I am selling boat, electronics and trailer so I can buy something larger with a cabin for my family. Here are some pic's in the post below. Price $38,500 o/b/o includes trailer |
#2
|
|||
|
|||
Re: 1979 Fully Restored 23' Seacraft *DELETED*
Post deleted by Trayder
|
#3
|
|||
|
|||
Re: 1979 Fully Restored 23' Seacraft
|
#4
|
|||
|
|||
Re: 1979 Fully Restored 23' Seacraft
CValle,
You may hate to hear this, but could you make the pic's somewhat bigger? From what I can see, your results deserve the effort. It looks really good from what I can tell.
__________________
Getting home is more important than getting there! Plan accordingly! |
#5
|
|||
|
|||
Re: 1979 Fully Restored 23' Seacraft
Big Lew,
Thanks for the input. If you click on the picture, does that help? |
#6
|
|||
|
|||
Re: 1979 Fully Restored 23' Seacraft
It certainly does help, BIG time! (I couldn't resist the pun!)
I thought I might have seen them before. That's the one with the steering wheel off a Merrit I think and at least one of the dash panels is solid vs. veneered teak. Am I correct?
__________________
Getting home is more important than getting there! Plan accordingly! |
#7
|
|||
|
|||
Re: 1979 Fully Restored 23' Seacraft
The steering wheel is off the Merrit. Both panels are solid mahogany. No veener.
|
#8
|
|||
|
|||
Re: 1979 Fully Restored 23' Seacraft
New price. $30,000 o/b/o for a fully restored boat and trailer. Must sell due to family.
Click on pictures to enlarge. |
#9
|
|||
|
|||
1979 Fully Restored 23' Seacraft: New Price!
|
#10
|
|||
|
|||
Re: 1979 Fully Restored 23' Seacraft: New Price!
what year is the motor and original owner motor?any compression numbers? carbed ox66? was deck raised, self bailing (dont think so in pics)? i.e. how far into the stringers and hull did the restoration go? pics can not tell...see deck cut out for tank.
nice looking job... got a shot of the wiring under console? more than want to spend with 2 stroke non injected, but will keep eye on it. am on outer cape.
__________________
--------- 1977 Seacraft, Armstrong Bracket 275(chipped 250!) Verado Merc Rev 4 17P |
|
|