Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-05-2008, 09:14 PM
bigeasy1 bigeasy1 is offline
Senior Member
 
Join Date: Jul 2006
Location: western massachusetts
Posts: 1,048
Default 74 Tsunami Project ,It's getting there with pics.

Well,I'm finally closing in on the finish of my 1974 23 Tsunami.

****I have to thank many of you guys on this site for your help and knowledge to get me this far.****

It's will be two years this December.Every single thing has either been replaced, re glassed, re wired, or rebuilt
It has been a massive undertaking,although it was only weekends,and not many of those in the new england winter.

All the electronics such as the Fishfinder,Gps,Vhf, Radar,etc.,are all new,as are the 8hp Yammie kicker,and Scotty riggers.

Everything from the rubrail up,and inside,was painted with a two part urethane,made by Epifanes(Similar to Imron).

The deck floor,and engine box were covered with a non skid surface by rolling on a thickened coat of sand color gel coat.

Remaining work to be done,is to mount the outdrive,install the seating, the radar arch,paint the hull,and install the electronics,and have the canvas work and ising glass windows done .
Will definitely be out fishing with it in the spring.Oh yeah,also have to build the cabin doors.

Here's a few pictures,only showing what it looked like the day i got it,and what it looks like now.
When i finish it completely,I'll bore everyone with the whole tear down and rebuild project with pictures.

Thanks for looking



*********The Day I Picked It Up**********



**************Ready To Tow It Home*************


*********What I Found When I Opened The Hatch.*********


****Finished Inside Looking From Cuddy Towards The Stern***


****Looking From Stern To Front & showing controls******





************New Steering,Gauges,& Shift**********


**************Close Up Of Non Skid***************


***********Arch***********


*********The New Radar Arch & Rocket Launcher********
__________________
All this,just for a boat ride
Reply With Quote
  #2  
Old 10-06-2008, 10:12 AM
Islandtrader Islandtrader is offline
Senior Member
 
Join Date: May 2007
Location: Tarpon Capital Of The World
Posts: 2,122
Default Re: 74 Tsunami Project ,It's getting there with pics.

Looking very nice. By the number of rod holders and such, I would say you are serious about fishing.
__________________
[SIGPIC][/SIGPIC]

"If You Done It...It Ain't Braggin"



my rebuild thread: http://www.classicseacraft.com/commu...ad.php?t=18594
Reply With Quote
  #3  
Old 10-06-2008, 12:11 PM
bigeasy1 bigeasy1 is offline
Senior Member
 
Join Date: Jul 2006
Location: western massachusetts
Posts: 1,048
Default Re: 74 Tsunami Project ,It's getting there with pics.

Yep,
I'm a pretty serious fisherman.The boat will have four downriggers,and several other rod holders(14-18 total) on it,when its done.
We fish the Great Lakes for Salmon,and normally troll six to eight rods,with another six or eight at the ready,in unused holders.

I actually live much much closer to the salt than the lakes,and i envy some of the fish you guys catch,especially you florida guys.
I'd love to fish the ocean,if it didn't have that one nasty ingredient in the water.(salt).

If i kept the boat near home,I'd make a few trips to the salt,but seeing as i leave it 400 miles from home,it won't be happening soon.
It's kind of nice having a Seacraft on the Great lakes,because with the exception of a few guys,most people know nothing about them.

When i bought this boat They all thought i was crazy,it sat in a field for six years,and most of the guys never heard of a Seacraft Tsunami,so i got the boat and trailer for 1,000 bucks.
It was like the US buying Alaska for cheap,everyone thought Seward was nuts,boy were they wrong.
__________________
All this,just for a boat ride
Reply With Quote
  #4  
Old 10-06-2008, 12:27 PM
bigeasy1 bigeasy1 is offline
Senior Member
 
Join Date: Jul 2006
Location: western massachusetts
Posts: 1,048
Default Re: 74 Tsunami Project ,It's getting there with pics.

Thanks guys,Chuck,I was wondering what people would think of those cup holders.
We use them for all the small rigging crap,like the Planer board,and Downrigger releases,Drop weights,Hook rigs,Teminal tackle,Cell phones,and you name it.They really work great for all that kind of stuff.

And thanks again chuck for the info on wet sanding and buffing out the paint.I tried a small section,and it looks spectacular.
__________________
All this,just for a boat ride
Reply With Quote
  #5  
Old 10-06-2008, 04:46 PM
Dilligaf Dilligaf is offline
Senior Member
 
Join Date: Feb 2008
Location: Va Beach,VA
Posts: 288
Default Re: 74 Tsunami Project ,It's getting there with pics.

waiting for the pics and info on rebuild i have the exact same set-up. raise the floors?
Reply With Quote
  #6  
Old 10-06-2008, 05:25 PM
bigeasy1 bigeasy1 is offline
Senior Member
 
Join Date: Jul 2006
Location: western massachusetts
Posts: 1,048
Default Re: 74 Tsunami Project ,It's getting there with pics.

Dilligaf,
Believe it or not,i decided to keep the same original red hull color,because of your boat.I liked the way it looked in your previous posts.
I didn't raise the deck floor,as almost all of it was very solid.The exception was a small section under the seat,and i recored that only.

BTW, what do you get for speed out of yours?and what size prop are you running? Is yours taking a lot of water thru the scuppers?
Thanks
__________________
All this,just for a boat ride
Reply With Quote
  #7  
Old 10-06-2008, 08:51 PM
Entourage Entourage is offline
Senior Member
 
Join Date: Dec 2007
Location: Fairhaven Mass
Posts: 583
Default Re: 74 Tsunami Project ,It's getting there with pics.

Wow what a deal some guys have all the luck running into something like that. That boat wouldn't have sat around that long over here on the cape for that much money. I like the color i have a red 73 tsunami that i brought back from the dead. It looks like it went to a good home nice work
Reply With Quote
  #8  
Old 10-06-2008, 10:15 PM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default Re: 74 Tsunami Project ,It's getting there with pics.

It looks great, I do notice the Red gel coat sure holds up better up north - Fl sun just kills it
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
  #9  
Old 10-06-2008, 10:59 PM
Tarpun Tarpun is offline
Senior Member
 
Join Date: Mar 2004
Location: Ormond Beach, Florida
Posts: 187
Default Re: 74 Tsunami Project ,It's getting there with pics.

Great re-hab! Love the arch. Good luck with her.
__________________
Tarpun
1972 20 Seafari
1977 23 Savage
1980 20'Master Angler

Reply With Quote
  #10  
Old 10-09-2008, 02:15 PM
thehermit thehermit is offline
Senior Member
 
Join Date: Aug 2006
Location: Chatham, MA
Posts: 777
Default Re: 74 Tsunami Project ,It's getting there with pics.

Quote:
Yep,
i got the boat and trailer for 1,000 bucks.
Nice and nice work!
__________________
__________________________________________________ ________________
1974 23SF
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft