![]() |
|
#1
|
|||
|
|||
![]()
So my PIA DMV says I need an "etching" of the trailer vin for the used trailer that came with a skiff I picked up, as I don't have a regi. from the guy. Does anyone know where the heck a trailer company might stamp the vin on a trailer so I can do a pencil rubbing of it.
If I can't find it, I'll have to go the homemade route, but I need to get the boat off of it to get the unladen weight in order to go that route and I'm just not ready to take the boat off right now. I love my state govt.! ![]() |
#2
|
|||
|
|||
![]()
Trailer VIN # are stamped into a metal plate or metal decal forward of the axle, usually on the tongue of the trailer near the coupler.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes. Fr. Frank says: Jesus liked fishing, too. He even walked on water to get to the boat! Currently without a SeaCraft ![]() (2) Pompano 12' fishing kayaks '73 Cobia 18' prototype "Casting Skiff", 70hp Mercury |
#3
|
|||
|
|||
![]()
The VIN may also be stamped right in the metal. Check the tongue and the side rails (frame rails whatever they are called) near where they meet the tongue. It should be there look hard.
|
#4
|
|||
|
|||
![]() Quote:
![]() |
#5
|
|||
|
|||
![]()
The way they acted at my dmv you'd think I was registering a handgun. I've looked and all I can find so far is a sticker near the tongue that looks like it may have once had the vin on it. We'll see.
|
#6
|
|||
|
|||
![]()
Some states require the number stamped on the axle as well, usually just inside of the spring. I've seen trailer axles with ID plates on them. You might try looking there, unless it's corroded.
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg |
#7
|
|||
|
|||
![]()
It should be on the trailers "port side" near the tounge,but most likely has either worn off or missing.For the life of me,I can't figure out why these trailer companies make the cheezy aluminum foil serial number stickers.They never last.
I bought my boat and trailer in NY and had the same problem registering the trailer. I live in Massachusetts,and My Insurance co,and State DMV both needed a serial number. Simple solution,I went into my garage cut a piece of 1/8" aluminum into a 3x5" plate and took my letter and number stamps,and made up a long serial number.I came up with the number out of the blue. I riveted it to the trailer frame.The DMV & Ins.co accepted it. I said it was a 1985 Shoreline trailer(they're out of business)
__________________
All this,just for a boat ride |
#8
|
|||
|
|||
![]()
There's thought. I have the vin number-they just want an etching. I actually have a copy of the certificate of origin, but the sobs wont take it. Now I just need someone to engrave the numbers into something for me. I never thought of that. So many things to McGuiver with a boat.
|
![]() |
|
|