![]() |
|
#1
|
|||
|
|||
![]()
anyone have the dimensions or a diagram of the fuel tanks for an inboard 23?
|
#2
|
|||
|
|||
![]()
What happened to the old ones in your boat I thought it was a complete boat?
__________________
1976 Seacraft CC(Pilot House) Inboard Yanmar 315 1979 Septer I/O no power Sold ![]() |
#3
|
|||
|
|||
![]()
They are not the original tanks at some point they were replaced. I would of left them in place but on further inspection found a few pin holes and I'm sure there are several more.
|
#4
|
|||
|
|||
![]()
I believe there's a guy selling a tank from a 23 he's restoring around here in Mass. I'll see if I can find the link, maybe he can help you out???
Last edited by GMac7; 01-25-2012 at 05:10 PM. |
#5
|
|||
|
|||
![]() |
#6
|
|||
|
|||
![]()
Thanks for the help GMac but that seems to be the tank off of an outboard model the inboard tanks are two 55gallon tanks i believe.
|
#7
|
|||
|
|||
![]()
Do they look like this:
![]() If so, I can get you some measurements in the next day or two. Dave
__________________
Blue Heron Boat Works Reinventing the wheel, one spoke at a time. |
#8
|
|||
|
|||
![]()
Hey Dave, is that part of the "Blue Heron" scrap inventory???
![]() ![]() |
#9
|
|||
|
|||
![]()
Nope, Don. That's what my tanks looked like when I first pulled them from the 25. I've refurbished them and coated them with epoxy, and hope to get them back in this weekend.
jesusv, Looks like you've got it covered. Good luck with the restoration. Dave
__________________
Blue Heron Boat Works Reinventing the wheel, one spoke at a time. |
#10
|
|||
|
|||
![]()
than
Last edited by jesusv; 01-25-2012 at 09:34 PM. |
![]() |
|
|