Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > For Sale
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-17-2012, 08:52 PM
TooFly TooFly is offline
Senior Member
 
Join Date: Aug 2010
Location: North Shore, MA
Posts: 216
Default T-Top from a 20' CC For Sale

I took this T-Top off my boat last fall. It's in pretty good shape, according to those whom have seen it in person. Asking $600. I'm located 15 minutes north of Boston.

These aren't the best pics, but you get the idea.







Thanks,
Paul
__________________
1969 20' Potter SeaCraft
2007 150hp Evinrude E-TEC
Reply With Quote
  #2  
Old 05-17-2012, 10:23 PM
YeA 20sF YeA 20sF is offline
Senior Member
 
Join Date: Aug 2011
Location: S.FLA
Posts: 340
Default

How wide was the console that it was mounted to ?
__________________
78' / 20SF / Merc XRi Black Max 150
Reply With Quote
  #3  
Old 05-22-2012, 04:49 PM
TooFly TooFly is offline
Senior Member
 
Join Date: Aug 2010
Location: North Shore, MA
Posts: 216
Thumbs down

Quote:
Originally Posted by YeA 20sF View Post
How wide was the console that it was mounted to ?
The width at lip of the front of the console is ~ 41.5". The rear (wheel end) is ~ 43".

Thanks,
Paul
__________________
1969 20' Potter SeaCraft
2007 150hp Evinrude E-TEC

Last edited by TooFly; 05-22-2012 at 05:29 PM. Reason: Trying to get rid of the "thumbs down" icon. LOL. No luck.
Reply With Quote
  #4  
Old 05-17-2012, 10:25 PM
TooFly TooFly is offline
Senior Member
 
Join Date: Aug 2010
Location: North Shore, MA
Posts: 216
Default

I'll check the measurements and try to post it in the a.m.

Thanks,
Paul
__________________
1969 20' Potter SeaCraft
2007 150hp Evinrude E-TEC
Reply With Quote
  #5  
Old 05-18-2012, 10:41 AM
jaybap jaybap is offline
Member
 
Join Date: May 2011
Location: newport, ri
Posts: 65
Default

Im interested. please post measurements. Hows the top and alum condition 1-10?
Reply With Quote
  #6  
Old 05-22-2012, 05:34 PM
TooFly TooFly is offline
Senior Member
 
Join Date: Aug 2010
Location: North Shore, MA
Posts: 216
Default

Quote:
Originally Posted by jaybap View Post
Im interested. please post measurements. Hows the top and alum condition 1-10?
The width of the inner edges of the rear aluminum base pads is 43" (side to side). The forward pads are also 43" apart.

The dimensions of the top are ~ 82" x 59". I had to take these measurements on my own, so they're approximate.

There's a 2 1/2" tear in the canvas at the edge of the front. I'd otherwise give the canvas a 6. It's weathered but in good shape.

I'd give the aluminum a 7. A friend, who has several fully restored vintage cars, said the same. The aluminum is pretty bright and looks good. The welded joints are slightly pitted. No rust.

There are two access holes (1" maybe) near the top and bottom of the forward legs to run wires for lights, gps, antennas, etc. There are also two small holes drilled through the forward crossbar. Someone bolted the t-top to the console there.

I'll get some closeup iPhone pics in a bit.

Thanks,
Paul
__________________
1969 20' Potter SeaCraft
2007 150hp Evinrude E-TEC
Reply With Quote
  #7  
Old 05-22-2012, 05:37 PM
TooFly TooFly is offline
Senior Member
 
Join Date: Aug 2010
Location: North Shore, MA
Posts: 216
Default

The rod holders are in good shape, too.
__________________
1969 20' Potter SeaCraft
2007 150hp Evinrude E-TEC
Reply With Quote
  #8  
Old 06-02-2012, 07:34 PM
TooFly TooFly is offline
Senior Member
 
Join Date: Aug 2010
Location: North Shore, MA
Posts: 216
Default

I just found the electronics box, which came with this top, buried in my garage. I'll throw it in, too.

Thanks,
Paul
__________________
1969 20' Potter SeaCraft
2007 150hp Evinrude E-TEC
Reply With Quote
  #9  
Old 06-02-2012, 11:15 PM
Treeshark Treeshark is offline
Junior Member
 
Join Date: Apr 2012
Posts: 3
Default Still for sale?

If it is still for sale I am interested. i can take a ride up and have a look at it some time next week. Drop me a note or call my cell at 347-525-8493.
Thanks
Reply With Quote
  #10  
Old 06-03-2012, 11:48 AM
TooFly TooFly is offline
Senior Member
 
Join Date: Aug 2010
Location: North Shore, MA
Posts: 216
Default

Quote:
Originally Posted by Treeshark View Post
If it is still for sale I am interested. i can take a ride up and have a look at it some time next week. Drop me a note or call my cell at 347-525-8493.
Thanks
It is. I'll give you a call in an hour or so.

Thanks,
Paul
__________________
1969 20' Potter SeaCraft
2007 150hp Evinrude E-TEC
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft