20 Seacraft; need help with a couple things

[mjl]

Hi everyone, i been a huge seacraft fan & forum lurker for years. A while ago i picked up a 1999 20 seacraft and love the boat. The boat has a few issues, the most important being a few spots on the floor that are starting to get a little soft.
I've read about some injection products, but not really sure if thats the right thing to do here.

pic attached of the spots.

thanks for looking!
Mike

[mrobertson]

The injection process is easy, the bigger issue is figuring out how to match that molded non-skid.

[Jgarc091]

Gibco and Mas epoxies sell flex-mold for non skid like that. Also there are youtube videos on how to do it, Good Luck

[Blue197320]

i think personally you should see how wet the core material is and how far the wetness has spread. its not a huge job to grind that skin off or cut it off and replace the core and reuse the skin.

[gofastsandman]

Originally Posted by Blue197320

i think personally you should see how wet the core material is and how far the wetness has spread. its not a huge job to grind that skin off or cut it off and replace the core and reuse the skin.

Ditto Evan. Got any more shirts?

Save your skin.

[Jgarc091]

I agree with Blue^^^ first priority should be to remove and replace the core material that has been compromised otherwise in a couple years it will probably be noticeably worse

[Blue197320]

actually sandy i do...

[gofastsandman]

Originally Posted by Blue197320

actually sandy i do...

Whatcha got in medium or a very small large size.

Was nice of you to do that. I heard some didn`t pony up for the goods......

[DonV]

You mean from the Keys in 2009?? I'll buy another couple of XL long sleeve ones to go with the five I already have.

[Islandtrader]

Originally Posted by DonV

You mean from the Keys in 2009?? I'll buy another couple of XL long sleeve ones to go with the five I already have.

I could use XL also