Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-25-2019, 08:22 PM
fishingproblem fishingproblem is offline
Recovered
 
Join Date: Feb 2018
Posts: 44
Default Looking for Love in all the wrong places, SO CAL

Not many Seacraft boats on the left coast and the few I have looked at are in need of seemingly major work. Today I finally looked at one that has been in my sights for awhile and it had some curious features. First of all the ID plate has been compromised and there was no visible SN. It is listed as a 21' however I walked it off at closer to 19'. Is it a SF20'?

There are holes below the water line one forward starboard side below the fish box and two aft serving as deck drains outlets. There is the standard drain located center bottom on the transom and then one more drain hole port side below the water line. At the risk of seeming ignorant of marine engineering is it effective or safe to have a deck drain going straight down?
Attached Images
    
Reply With Quote
  #2  
Old 09-25-2019, 09:07 PM
Capt Chuck's Avatar
Capt Chuck Capt Chuck is offline
gucci
 
Join Date: Aug 2003
Location: Sailfish Capital, fla
Posts: 2,804
Default

That picture is not a
VDH Seacraft
__________________


1978 23' Superfish/Potter Bracket 250HP --------



as "Americans" you have the right to ......
"LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
Reply With Quote
  #3  
Old 09-25-2019, 09:14 PM
fishingproblem fishingproblem is offline
Recovered
 
Join Date: Feb 2018
Posts: 44
Default

Quote:
Originally Posted by Capt Chuck View Post
That picture is not a
VDH Seacraft
Say what Chuck!? Here is another picture of transom.

Is it not even a Seacraft?
Attached Images
 
Reply With Quote
  #4  
Old 09-25-2019, 10:06 PM
erebus erebus is offline
Senior Member
 
Join Date: May 2012
Location: Cape Cod
Posts: 428
Default

Sure looks like a classic SF20 to me.
__________________
Zachary

[SIGPIC][/SIGPIC]
Reply With Quote
  #5  
Old 09-25-2019, 10:24 PM
NoBones NoBones is offline
Pooh Bah
 
Join Date: Apr 2004
Location: Area 442 Somewhere in Florida
Posts: 3,699
Default

Ugh NO, the ass looks OK, the bow NO !!
Something wrong on the keel.....

The keels on a VDH do not have a lip on the cutting edge .....
The spray rail as well..

If it is a SeaCraft someone "presidential engineered" the structural
integrity of the bow.......
__________________
See ya, Ken ©
Reply With Quote
  #6  
Old 09-26-2019, 07:40 AM
erebus erebus is offline
Senior Member
 
Join Date: May 2012
Location: Cape Cod
Posts: 428
Default

Quote:
Originally Posted by NoBones View Post
The keels on a VDH do not have a lip on the cutting edge .....
The spray rail as well..
I see what you mean. Does look odd in the photo.
I chalked it up to an optical delusion.
__________________
Zachary

[SIGPIC][/SIGPIC]
Reply With Quote
  #7  
Old 09-26-2019, 10:25 AM
DonV DonV is offline
Senior Member
 
Join Date: Jul 2004
Location: Apollo Beach or Islamorada
Posts: 3,488
Send a message via ICQ to DonV
Default

Just got in from raising my engine up a hole and what do I see on the old CSC forum, built in spray rails that look to be about 1 1/2" or so. Sure not on my 23'er and I don't remember seeing those before on a 20'er. Plus Looks like the bow entry is rather square versus the SC which is a bit sharper, optical delusion?, need more pics. Strange.......
Reply With Quote
  #8  
Old 09-26-2019, 01:15 PM
fishingproblem fishingproblem is offline
Recovered
 
Join Date: Feb 2018
Posts: 44
Default

I went back this morning and took what I hope are better pictures.

Thanks for everyone's perspective and insights.

David
Attached Images
   
Reply With Quote
  #9  
Old 09-26-2019, 08:19 PM
Capt Chuck's Avatar
Capt Chuck Capt Chuck is offline
gucci
 
Join Date: Aug 2003
Location: Sailfish Capital, fla
Posts: 2,804
Default

Well, that first picture posted Spooked me a bit. It doesn't appear to be a Potter hull but someone tweaked the spray rail as Ken said. What does your title say?
Here's a Potter Hull pic with the bow lifting strake.
Attached Images
 
__________________


1978 23' Superfish/Potter Bracket 250HP --------



as "Americans" you have the right to ......
"LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
Reply With Quote
  #10  
Old 09-26-2019, 09:51 PM
NoBones NoBones is offline
Pooh Bah
 
Join Date: Apr 2004
Location: Area 442 Somewhere in Florida
Posts: 3,699
Default

OK, your good..
Someone added the spray rails (glassed in) and beefed up the
keel with a skid on it...

They threw a coat of bottom paint on, so be weary of what lurks
underneath of it..

It is a genuine SeaCraft !
__________________
See ya, Ken ©
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:46 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft