|
|
|
|
#1
08-26-2021, 11:19 AM
|
|||
|
|||
Old Merc Knowledge Needed
A good friend of mine is in need of installing SeaStar steering on an early 80’s v6 Merc Black Max. The below pics and nameplate will let the Merc gurus know what I’m working with.
First off I need to know what I need part wise to make it work. I am open to do it piece by piece or a specific kit. If someone here has what I need and wants to work a deal, that would be great. If not would really appreciate help figuring out what I need to get this done and free up some shop space for another project.
__________________
[b]The Moose is Loose ! 
|
|
#2
08-26-2021, 07:40 PM
|
|||
|
|||
|
Moose - I run a seastar 1.7 helm with a hynautic k6 ram (you just have to change to seastar fittings). It'll work great for that motor. Let me run down to the garage and I can get numbers of the older seastar stuff. I also have Shana's seafari here with that exact mid section and he runs a baystar setup.
Serial number is 1984 mercury 2.4L 200hp. You have a single ram mid section with external trim and tilt. The 1pc. heads are newer from 88/89/90.
|
|
#3
08-26-2021, 08:44 PM
|
|||
|
|||
|
Bay Star Ram (shana's)
|
|
#4
08-26-2021, 08:46 PM
|
|||
|
|||
|
Hynautic k6
|
|
#5
08-26-2021, 09:46 PM
|
|||
|
|||
|
current seastar offering
|
|
#6
08-26-2021, 09:56 PM
|
|||
|
|||
|
Old discontinued seastar ram HC5340-42
|
|
#7
08-26-2021, 10:00 PM
|
|||
|
|||
|
Old discontinued seastar ram HC5340-42. I haven't used one of these recently on an older 2.4L 200, but I don't recall having any trouble with it.
|
|
#8
08-26-2021, 08:40 PM
|
|||
|
|||
|
Quote:
Do not tell me that new shop is filling up ? News at 11 PM We need photo evidence..  Remember what I said once you have to walk sideways through your shop, dang it, built it to small ! I feel your pain, cause I too have friends that have helped me fill my shop as well. 
__________________
See ya, Ken ©
|
|
#9
08-27-2021, 09:25 AM
|
|||
|
|||
|
Quote:
__________________
[b]The Moose is Loose !
|
 |
|
|
Hybrid Mode
