TomParis Trailer Advice 07-17-2016, 04:25 PM
bumpdraft Don't forget fuel and gear... 07-17-2016, 04:55 PM
RUSTYNTABATHA http://www.tiedown.com/ ... 07-17-2016, 05:12 PM
DonV Check out these guys......
... 07-17-2016, 05:53 PM
bumpdraft I noticed on that site, that... 07-17-2016, 08:08 PM
Snookerd Don's suggestion is who I... 07-17-2016, 09:30 PM
Islandtrader I use a local guy...and he... 07-18-2016, 08:06 AM
DonV Terry speaks the truth. It's... 07-18-2016, 08:45 AM
TomParis I rechecked my measurements... 07-18-2016, 09:05 AM
Bushwacker Tom, here's another outfit... 07-18-2016, 12:35 PM
flyingfrizzle This is what I do, every 4-5... 07-18-2016, 12:54 PM
DonV You are so right Frizz!!! Got... 07-18-2016, 02:07 PM
FishStretcher An ALUMINUM single axle... 07-18-2016, 02:29 PM
TomParis I wish I had a single... 07-19-2016, 07:20 AM
flyingfrizzle Most of the time I went to... 07-19-2016, 07:34 AM
DonV You get one of these tandem... 07-19-2016, 07:42 AM
kmoose I am surprised they don't... 07-19-2016, 02:02 PM
DonV They do, special order. There... 07-19-2016, 05:46 PM
TomParis ok one more measurement and... 07-19-2016, 07:23 PM
DonV Dang Tom, those springs look... 07-19-2016, 10:56 PM
TomParis Well. terry thought so too.... 07-19-2016, 11:29 PM
flyingfrizzle If you don't want to move the... 07-20-2016, 12:09 PM
Highwayman Ditto on the torsion axels!!! 07-20-2016, 09:27 AM
Capt Terry Trailer Tip 07-20-2016, 11:44 AM
gofastsandman Try expediter.com.
Large... 07-19-2016, 07:48 PM
bumpdraft I like the torsion axles as... 07-19-2016, 08:40 PM
pelican roller trailer...
roller... 07-19-2016, 08:55 PM
gofastsandman Sometimes my head gets really... 07-19-2016, 10:00 PM
bumpdraft Put a few wire ties around em... 07-20-2016, 07:56 AM
DonV Well at least the Channel 2... 07-20-2016, 08:02 AM
bumpdraft I may have got them mixed up.... 07-20-2016, 08:54 PM
|
#1
|
|||
|
|||
Trailer Advice
So I am trying to get my trailer ready for the Seacraft meet at Crystal River, and my leaf springs are in bad shape. So the question is, its a double axle trailer with leaf springs that are connected in the middle and I measured from bolt to bolt and they are like right at 21.5 from the middle of the bolt to the middle of the bolt.
So now I am trying to find the springs locally to replace them myself to save money, and I found these I figure with two sets of them that would be a maximum of 4,ooo lbs, which should be fine with a 20' Seacraft and a 115 motor I would think. Looking for advice, thanks. Tom http://www.tractorsupply.com/tsc/pro...y?cm_vc=-10005 |
Thread Tools | Search this Thread |
Display Modes | |
|
|