1977 20' Master Angler Restoration

[diverjon123]

Progress three

had a little trouble with the gelling the hull. the previous owner had sanded the hull in some areas down past a layer of grey primer. unfortunately, after sanding the orange peel the gray was shadowing through. bought 5 gallons of FLY gel coat and plane on regelling the hull with 2 gallons, the bottom of the hull with 2 gallons and gelling the bottom of the t top with that last of it.

a engine hoist was use to raise the boat off of the bunks. worked well. dont try at home.

you can also see some "fixes" the old owner attempted. pretty made stuff.