Relocated scuppers

[stevebrownell]

I just finished relocating the scuppers on my 72 20 I/O from each corner of my transom, to about 2 inches higher and 2 inches inward. After looking at some of the scupper fixes on CSC.com member's boats, I'm wondering if I should have mounted them higher. I did not raise the floor, so the drop from deck to transom outflow is about 2 inches over 2 feet. Also plan on adding the TH ball scuppers to the tubes I glassed in, but they will be below the waterline.

Question: did I go to low placing the exit holes where they are, or should I be ok. This boat will always be trailered, so it will not sit unattended.