Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 07-14-2006, 02:05 PM
oldfielder oldfielder is offline
Senior Member
 
Join Date: Jun 2005
Location: Miller Place, NY
Posts: 269
Default Re: 1974 23 SF I/O Desirability

Funny you should ask-I installed a cheap navman this year and what a learning experience in efficiency.That 32 was at around 3200-3300, but since I've installed the meter-my best rpm is right around 3000-cruising about 28 in relatively calm seas. That's at a burn of about 10 gph, give or take .1 or .2. The chop on LI sound can change that in a hurry. I ran it at 4000/4001-a little short of wot, which is in the 4400-4800 range according to merc, and I was running just about 30 knots-I think it was 29.7. I/m guessing wot will take me to 37-38 mph.
I'll get you some exact #'s this weekend at 3200 for comparison's sake.
The motor is a carbed merc 5.7 which has been running for about four years of light use, which has change to heavy use since I got the boat
I know everyone here is big tab fans, but so far I'm very happy with t he planing capabilities(if I give it the juice it planes almost immediately) of this boat and since I usually fish with one or two guys on board-it's pretty easy to redistribute the weight.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:35 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft