Here We Go Again

[strick]

No It was not intentional...it was another strick screw up. Fortunately I was able to grind down the inner lip and get it to sit flush. Thanks for that diagram Don.

Mold for anchor hatch



duratec



Glass



Test fit. Too High



Grinding down the lip



Second test fit. Much better



close up of hole for anchor rope



My leaning post came in today. Thanks Tim!



Scupper test fit. These are the TH marine scuppers. I bought two pair. The other set will go on the 23 some day.




The plastic pipe is semi rigid. The cockpit drain fit's nice and snug into the pipe flange. It is water tight. A hose clamp will hold these two parts together. The Pipe will get epoxied into the transom and cut 3/16" beyond the transom so it will fit into the receiver of the TH marine scupper. Simple and effective.

strick