Transom Re-Build Check List...

[Islandtrader]

At the end of the month I will be getting some free labor (son-in-law). Good time to get my transom done. After reading a lot of the posts here on transom re builds here is my check list.

Prep plywood with epoxy (slow cure and 10% acetone).

Epoxy PW cores to each other.

1 layer 1708 to PW core (inside face).

1 layer of 1708 to inner transom skin.

Epoxy and bed transom core to inside of transom skin.

Tape new transom core to sides and bottom. 12" 8" 4".

Does this look about right?

Please feel free to add or subtract to the list. I have a few weeks to prep and to get everything ready.

Thanks a bunch.