Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-26-2010, 09:56 PM
seafari25 seafari25 is offline
Senior Member
 
Join Date: Oct 2008
Location: Eastern Canada...Wallace, Nova Scotia every chance I get
Posts: 237
Default Re: I Need A Shrink !

Strick

I noticed in Connors pics, his fuel tank hatch is roughly half the size of ours. Ours goes right to the stepdown. I assume yours was the same as Connors before it was cut out. I guess the difference is that we have one tank and you guys have or had 2 and I guess they slid the one under first before installing the 2nd.

That being said, I know you have to rebuild yours and wanted to give you my thoughts. Ours is loosening up at the joint and is a little spongy where it meets the stepdown. It gets a lot of traffic and I think there should be at least 1' of solid floor at the top of the step. Even better if you have more, like Connors.

My opinion is based on the fact that the hatch hasn't really deteriorated much in the last 15 years since she's been under my care and knowing how much traffic she saw in the charter days so it was a little spongy 15 years ago. The rest of the hatch is solid although dipping a little in the middle.

You'll notice I use the words "a little" a lot. My theory is, when I start to use the words "a lot" a lot, thats when the major resto will begin.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft