Trailering eye on front keel of 20SF

[RS]

You might not be willing to go this route but how about just putting it in there where you can see, above the floor of the anchor locker...not perfect, maybe a little high...but is anyone going to care? Probably not. Then fill the old holes with epoxy...done.

My boat came to me with two bow eyes; the original that was loose, and a second one accessible from the anchor locker. I had the original removed when my boat was re-gelled, leaving just the higher one.

I like the higher one better since it makes it easier to reach down from the bow to connect/disconnect the winch strap.