New guy advice and help

[intubaitor]

Long story short, I will be in the market for a bigger boat in about a year. Something 23-26 ft CC. I was thinking along the lines of a New - 2year old 23-25 Sailfish, Cobia, ect. But...I possibly have an oportunity to start working on prying a 23' Seacraft from a family member. I know very little about it (including what, if anything I would get it for) so I will assume it needs a total restoration. I do know that its a '74 center console outboard and has been sitting for quite a few years.
I am a boat guy. I am aware that this might not and probrably wont "save me" any money compared to a comparable newer boat. I also know that this might be a good oportunity for a hull that could be a head turner when its done. Something I can take some pride in.

Is there any posts on general costs in taking on something like this? Full transom, stripping and paint, fuel tank replacement? I know the list probrably goes on and on of unexpected stuff for newcomers, so I want to do my research before I even start in on this deal. I am also sure some things I wont know until I dig into it, so I would rather go with worst case senarios.
I am not sure what I can and cant do myself. I have no fiberglass experience at all. Otherwise I am pretty handy and have probrably most of the tools to do it. I also have rerigged and rewired several boats and rather enjoy it.
I am going to spend some time reading what I can on here. Hopefully some of you can point me in the right direction of where to look and what to look for.
Thanks in advance.