floor drains - Classic SeaCraft Community

		Classic SeaCraft Community > General Discussion > Repairs/Mods.
floor drains

07-08-2011, 11:47 AM

Fr. Frank

Senior Member

Join Date: Oct 2003

Location: Shalimar, Florida

Posts: 2,265

Re: floor drains

Quote:

While you're waiting for the tubing you might consider filling and re-drilling the holes.

Make sure you dry out the wood blocks through which the tubes pass before filling with epoxy and re-drilling. And when you fill with epoxy, placing a plastic drinking straw through the middle of the existing hole before filling gives you a nice pilot hole when you get ready to re-drill. It needs to extend beyond the tape on both ends.

__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft

(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 09:03 AM.