A little lot of Karma. or re birth of a 20

[bly]

I have a mold I made of a 23 ft sea craft bracket. I made a rough part and cut it down to fit a 20 ft boat. The transom is 2 layers of penske board a couple layers of glass and gelcoat on most of the out side. Once I leveled the boat according to the pad on the bottom and the side chines. I started the rebuild. I am going to remove the cap and forward fish box deck soon. I did not want to remove too much until I get more structure back in. I have had too many boats change shapes when I remove too much at once, no matter how much I block and support it temporarily.