|
|
#11
04-08-2012, 01:27 PM
|
|||
|
|||
The last layers of glass, and first couple passes with filler. I also re-cored the casting platform hatch using some scrap 1/2in penske board.
 Then sanded the top of the hatch, removing the nonskid stripes, and then a layer of filler. I have a plan for this hatch and a decal that should be pretty cool when its done.  Other than that, its just fill, sand, fill sand. etc.  Casting platforms first layer of filler. I am not gonig nuts with the body work that will be under the nonskid. You can see the patch on the left side of the picture, it was a really strange crack that had a TON of filler in it, I believe it may have been from when they molded the boat it was much larger than I realized.  And the last layer of matt on the bow. 
__________________
Patrick from WAY out on cape cod. 1973 23foot Center console, Birdsall Ttop, Hermco Bracket... in progress Last edited by Wildman; 04-08-2012 at 01:30 PM. 
|
|
|
Threaded Mode