Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 08-24-2012, 03:29 PM
Bushwacker Bushwacker is offline
Senior Member
 
Join Date: Feb 2007
Location: N. Palm Beach, Fl.
Posts: 2,456
Default

If you're concerned about self-bailing at rest, Gillie's right, the scuppers out the back with the ping-pong ball check valves work well, although debris can keep the balls from sealing.

However, if you're worried about quickly removing a large volume of water from taking a wave over the bow in what may be a boat with low freeboard (maybe a flats boat?!), I think the suction in the vertical SeaCraft type scuppers with the wedge forward of the exit will beat gravity every time! The SeaCraft scuppers are about 1" ID; going larger would also help. And if you go with vertical scuppers, make sure you can get rubber plugs for them, because you need the plugs unless your deck is several inches above the waterline!
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975.
http://i188.photobucket.com/albums/z...Part2019-1.jpg

Last edited by Bushwacker; 08-24-2012 at 07:42 PM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft