Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 05-04-2013, 11:35 AM
joshmon71 joshmon71 is offline
Senior Member
 
Join Date: Mar 2008
Location: Cape Cod, MA
Posts: 194
Default

The 140 Zuke is the max HP in that block. I can think of 2 persons locally on lower cape whom have blown up their 140 Zukes. lots more reports on the net. I was unimpressed with the lead time to get parts/block for Suzuki as well. As a rule of thumb the highest HP in a smaller block on any fossil burning engine should give one pause. its not weak per se on HP just confidence questioning more for me. you are forgetting another important fact-whose your local mechanic/marina, if say the Suzuki certified tech is 2 hours away I would pass for that fact alone.

do you have a flotation bracket on the 20? were the decks raised? those sort of may assist the decision on engine weight as well. maybe I missed those items....

out of all of those I would say the yammie 2s. the 140 Suzuki sounds tempting but I would be concerned about a 20, sometimes loaded, with the smaller block size and highest HP rating.

tough call here with only those choices.

no experience with e-tecs myself, but might be something to think about....
__________________
---------
1977 Seacraft, Armstrong Bracket
275(chipped 250!) Verado
Merc Rev 4 17P
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft