Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 12-06-2014, 08:41 AM
pelican pelican is offline
Senior Member
 
Join Date: Apr 2010
Location: cape may nj
Posts: 596
Default

Quote:
Originally Posted by bbh57 View Post
My daughter had my boat out today and the motor oil tank went dry. Not sure why the pump didn't work from the lower tank or why the buzzer didn't go off.

I stopped pulling plugs when I found a bad cylinder, Do you guys think the crank will be shot? Its not locked up.

Its an 98 250 Yamaha 2 stroke, and although it didn't have a lot of hours it may not make sense to rebuild it.

those alarms - when key is turned to the "on" position,the alarm should sound - if not,check it out and find out why....

few things can make the remote tank pump inoperative - pump itself,trim indicator,float switch,wiring - or a clogged filter


odds are,crank is good - you're gonna need a powerhead overhaul/replacement

getting the powerhead off can be a little difficult - but,having pulled probably 20/25 v6 powerheads over the years -shift rod replacement,you develop a few tricks...
__________________
do not let common sense get in your way
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft