Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 03-19-2016, 07:34 PM
Daysatsea Daysatsea is offline
Junior Member
 
Join Date: Jul 2012
Location: Cape Cod
Posts: 11
Default

I removed the hatch and cut off the skin above the old core. Chipped out the old wet balsa core and ground down the entire underside. Wet out the entire surface with poly resin and laid down at wetted out sheet of Matt, 1/2" core cell which I had beveled off. Wet that out and finished with a layer of mat and then a layer of woven. Covered the whole wet area with wax paper, laid it wet side up on the shop floor and added 200 lbs of weight to keep or flat.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft